How to insert the battery
Be sure to insert the battery completely and in the proper direction,
as shown in the figure. The battery will not charge when its positive
and negative terminals are not lined up with those of the charger, or
if the terminals are not fully connected. Be sure that the battery does
not stick out at an angle.
8
All manuals and user guides at all-guides.com
1
Connect the power plug to the charger.
2
Insert the battery as detailed in "How to
insert the battery" in the instructions.
3
Insert the power plug into an electrical
outlet (AC100 - 240 V). The red charge
indicator lights and begins charging the
battery.
4
When charging is complete, the charge
indicator turns green. Be sure to
disconnect the power plug from the outlet
when charging is complete. Then remove
the battery.
Notes:
● Although battery charging is guaranteed when the air temperature is 0°C - 40°C/32°F
- 104°F, for best results, we recommend an air temperature between 10°C -
30°C/50°F - 86°F.
● If the red charge indicator blinks, the battery may be broken or not inserted correctly.
● The battery may become warm while charging, but this is not a malfunction.
● There may be static on other electronic equipment (such as a radio or television) if
the battery charger is plugged in to the same outlet. If this occurs, plug the battery
charger into a different outlet.
How to charge
*
The plug type varies depending
on the country where sold.
9