kiwy SLF 123 Manuel D'instructions page 20

All manuals and user guides at all-guides.com
USING THE ISOFIX CONNECTORS ( Fig. 8-10 )
SLF 123 comes with plastic guides (that you can use should your
vehicle not have any) so as to guide the Isofix connectors in their
appropriate position in correspondence with your car seats'
anchorage points .
Line up the two plasic guides with the Isofix connecting points.
Insert the two Isofix connectors in the guides.
Click both Isofix connectors to the Iso-fix anchor points .
IMPORTANT: Make sure that both connectors are properly attached
to the Isofix anchor points (you should clearly hear two "clicks").
When the Isofix connectors are properly attached, the safety
indicator (1) on each side of the Isofix connectors group is completely
green.
Complete the installation by using the car safety belts, following the
instructions referred to the different weight categories of the child.
To release the Isofix connectors ( Fig.11 ):
Press both release devices (2) as shown in the illustration.
To operate in a better condition, you may move the backrest slightly
upwards.
FIXING THE CHILD CAR SEAT FROM 9 TO 18 KG ( Fig.12-14)
(Application range from 9 months to 4 years of age approx.)
Check that both Isofix connectors are properly attached to the Isofix
anchor points.
Insert the safety belts of the vehicle through the two slots located in
the lower part of the backrest of the child car seat.
Insert the lap and diagonal sections of the car safety belt through the
opening of the belt guide located on the armrest which is closer to
the buckle of the car safety belt.
Fasten the seat belt.
Ensure that none of the parts of the car safety belt are twisted or
trapped and that the cover of the child car seat does not restrict or
prevent the correct movement or fitting of the car safety belt.
6