CD player cannot be remotely
operated
The record button on the cassette
tray cannot be operated
Cassette/CD running to fast/
too slow (for devices with pitch
control only)
The box sounds muffled or there
are synchronisation errors during
cassette playback
No Bluetooth
connection is made
®
Hereby, Arnulf Betzold GmbH declared that the radio equipment type for M100 Blue, M100 Funk and M100 Combi
is in compliance with Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at the following internet address:
www.betzold.de/marken/tls
Instruction manual
• Batteries empty
• No reception
• Cassette is protected against
accidental erasing
• Pitch control is not centred
• Cassette tape is loose
• Cassette tape is dirty
• There is already a Bluetooth
device connected
• Change the batteries in the
remote control
• Hold the remote control towards
the speaker casing/front panel
• If the cassette should be erased,
stick Sellotape over the openings
on the back of the cassette
• Control the speed using the
controller
• Tighten the cassette tape using a
pencil or similar
• Clean the erasing head, tape
head pressure roller and cap-
stan in the cassette player with a
cotton bud and alcohol
• Sever the existing connection
®
first in order to then connect your
device.
51