TLS M100 Blue Mode D'emploi page 39

RANDOM (randomiser)
The randomiser selects a track and starts playback. At the end of the track, a new track is randomly selected
and played.
- Press the RANDOM button to start the randomiser. The randomiser identifier (RANDOM) lights up in the
display.
- Press the RANDOM button again to end the function.
This function cannot be selected when playing a track programme.
PROG (track programming)
- Press the PROG button to start the track programming function.
- Select the track which you want to programme.
- Press the ENTER button to confirm programming of the track.
- Repeat steps 2. and 3. for additional tracks. Press the PLAY button to start playback in the order of your
programming.
- In order to delete your selection again, press the PROG button twice. Successful deletion is indicated in the
display with "PROGRAM is eliminated".
M (mode)
Using the M button, you can select the source for your playback: CD, USB, SD card or Bluetooth®. In order to
play back CDs, select CD. In order to play back data from a USB stick, select USB.
- Press the NEXT button to go to the next track.
- Press and hold the NEXT button in order to fast forward to a specific point in a track.
- Press the PREV button to go to the previous track.
- Press and hold the PREV button in order to rewind to a specific point in a track.
FOLDER (folder search)
With the << FOLDER >> buttons, you can choose between your individual folders in MP3 format. With the
<</>> buttons, you can select the recordings in each order from the first to the last track.
Instruction manual
39