Publicité
Les langues disponibles
Les langues disponibles
Installation
Over a laundry sink:
B
*
26
English
DV6900B_SimpleUX_WEB_Heatpump_EN.indd 26
2. Insert one end of the accessory hose (the long
3. Position the other end (the outlet) over a laundry
A
1. Make sure to place the end of the accessory hose
2. To bend the accessory hose so that it hooks over
A
Do not extend the drain hose by connecting another
hose to it. Water can leak from the connected area. If
you need more length, use a longer drain hose.
ln a standpipe or laundry tub
B
C
The laundry tub (B) or standpipe (C) must be no
higher than 35.4 In (90 cm).
C
Make sure the drain hose and the standpipe are not
airtight.
D
D: Hose retainer / E: Tie straps
E
drain hose) into hole (A).
sink or connect it to the drain pipe of a laundry
sink. See the instructions below or on the next
page.
no more than 3 ft. (90 cm) above the bottom of
dryer.
the edge of the sink, use the supplied plastic hose
guide (B) and secure the guide to the wall with a
hook or to the tap with a piece of string. Assemble
the drain hose (A) and the hose guide (B) and fix
them with the cable-tie (C).
CAUTION
NOTE
2022/8/30 17:01:56
Publicité
