Husqvarna L 221P Manuel D'utilisation page 14

5. Push the levers against the handle to lock the
handle.
6. Align the holes at the bottom of the lower handle with
the holes in the handle brackets.
Note: Select the holes that give the best operation
position.
7. Install the washers, knobs and bolts to the lower
handle. Tighten the knobs fully.
To set the product in transport position
1. Remove the grass catcher.
8
2. Pull the levers away from the handle to unlock the
handle.
3. Fold the handle down rearward.
4. Remove the knobs and the pins on the lower handle.
5. Fold the handle forward.
To assemble the grass catcher
1. Attach the grass catcher frame to the grass bag with
the rigid part of the bag on the bottom. Keep the
handle of the frame on top of the grass bag.
2. Attach the grass bag to the grass catcher frame with
the clips.
1219 - 002 - 08.07.2019