ITT Vogel Pumpen MXE 12 Serie Instructions D'installation Et D'entretien page 41

MXE 12_15 20.10.2006
41
MXE 14, MXE 15
10, 13:
Speed limitation
(min1 / min2) ON
if contact closed or «L»
at terminal 13
10, 11:
Pump OFF
if contact closed or «L»
at terminal 11
51, 54:
Error message:
closed during fault
max 250 V , 1 A
51, 64:
Operating message:
closed during operation
max 250 V , 1 A
min 1, min 2
(MXE 12/13 only min 1)
Power limiting
(P red)
12:37 Uhr Seite 41
english
Delivery condition
Plug bridge
inserted
min
Leistungs-
begrenzung
P red (rot)
Plug bridge
non
inserted
min. inserted:
min. non inserted:
P red. inserted:
P red. nion inserted:
Never re-plug jumper while under voltage
5.4 Minimum speed, power limiting
The pump can be set to a minimum speed (min1 / min 2).
The pump is set to a power limit P
Speed limitation 1 (min1)
Delivery condition
Speed limitation 2 (min2)
Power limiting ON
Delivery condition
Power limiting OFF
(max)
red