Bimar VC100 Notice D'instructions page 12

 Do not use the appliance if it is not operating correctly or seems
damaged; if in doubt, contact professionally qualified personnel.
 Make sure that the appliance is working correctly: if not, turn the
appliance off and have it checked by professionally qualified
personnel.
 Do not move the appliance when it is operating.
 Unplug the appliance when not in use.
 Do not leave the device exposed to the weather (sun, rain, etc.).
 Do not touch the appliance with wet hands or feet.
 Do not pull on the cord to move the appliance.
 Do not pull on the cord to disconnect the plug from the socket.
 If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualified persons in order
to avoid a hazard.
 Do not use the appliance with a timer or a programmer or with a
system that can switch on the appliance automatically, to avoid
risk of fire, since a fire risk exists if the appliance is covered or
positioned incorrectly.
 If the appliance breaks down or there is a malfunction, switch off
the appliance and have it checked by qualified personnel; repairs
carried out by unauthorised personnel may be dangerous and
invalidate the guarantee.
INSTALLATION
 After removing the packing materials, check the integrity of the heater; if you are
unsure, do not use it and ask for qualified professional help. The packing materials
12/40