Kessel Aqualift F Comfort 400V Instruction Pour Le Montage page 45

Rated power of the lifting station according to
the Kessel product range overview
Rated current (in operating mode) A
Power usage range, A
Maximum power, kW, cosφ =1
Weight, approx.
Dimensions (LxWxD), mm
Operating voltage
Current
Power, standby
Potential-free alarm contact (accessory)
Battery
Operating temperature, control unit
Protection degree
Connection type
Required fuse
Protection class
5.1 Additional information on the "ATEX version"
Maximum operating altitude
Maximum power consumption
(Electronics without motor)
(Terminals N, L1, L2, L3, PE)
Input circuits
(Terminals TF1a, TF2a, TF1b, TF2b)
Output circuits
Relay disruption and warning
Power contactors
Control circuit
The control unit is to be operated outside the area at risk from explosions. The necessary classification for this:
Group II, category 1G, related equipment for a gas atmosphere.
All manuals and user guides at all-guides.com
5 Technical data
MONO kW
1.1
3.2
2.5 - 4
2.7
2.5 kg
190 x 280 x 130
42 V DC / 0.5 A (two-way contact)
2x 9 V Type MN, Duracell, Order no. 197-081
11 VA mono system/ 15 VA dual system
230 V (AC)/50 Hz ± 10% supplied to the electronics
Thermocouple inputs Un = 230 V
Main switching contacts U = 400 V +-10% <=4 kW, 50 Hz
44 / 160
DUO kW
2.2 1.1
5.4 2x 3.2
4 - 6.3 2x 2.5 - 4
4.3 2x 2.7
3 kg
190 x 380 x 130
400 V AC 50 Hz
with cos phi =1
Approx. 5 W
0°C to +40°C
IP 54
Direct connection
C 16 A 3-pin
I
10-80%, non-condensing
2000 m above sea level
Rotary current
U = 42 V AC DC /0.5 A
Passive (switch and button)
5 Technical data
2.2
2x 5.4
2x 4 - 6.3
2x 4.3
V 1.3