Euroflex monster IS 56 HS Manuel D'instructions page 6

All manuals and user guides at all-guides.com
2 Filling the Water Tank/Boiler
The steam generator is designed to operate using tap water.
While unplugged and cool, place the Steam Generator Iron on a
stable, flat surface.
• Unscrew Water Tank Cap (see below).
To prevent overflow during filling, use the Funnel that came with
your Iron.
• Fill Boiler with water. Do not overfill. Be sure that water does not spill
over. If this occurs wipe up the excess water.
Do not fill past the base of the water cap thread.
• Replace the Water Tank Cap (CheCk tO
ensure that rubber gasket is in plaCe
On the Water tank Cap befOre
eaCh use) and screw it on firmly.
Be careful not to overtighten.
NEVER USE THE APPLIANCE
WITHOUT WATER IN THE TANK!
Unscrew Water Tank Cap
ALWAYS ADD WATER WHEN (RED) WATER INDICATOR LIGHT ILLUMINATES!
To fill Boiler while in use, see "Filling Boiler While In Use."
3
Turning On and Off
Turning On
• Plug Steam Generator Iron into a 120-volt electrical outlet.
6
Before Use & Using Your Iron
Fill Boiler using Funnel