All manuals and user guides at all-guides.com
8
After Ironing
• Turn the Iron off (see "Turning On and Off" section).
• Unplug the Iron & place it on Heat-Resistant Pad. Allow Iron to cool
completely - at least 1 hour.
• Secure Iron with Iron Belt.
• Store appliance in dry, indoor storage.
9
Cleaning the Soleplate
During normal use, a sticky coating (caused by starch, detergent
buildup or burnt synthetic fibers) can build up on the Soleplate. This
can be easily removed using a quality, hot iron soleplate cleaner,
available at most stores that sell small appliances.
To prevent scratching the Soleplate, do not iron over metal objects
(zippers, etc.), or place Iron on rough or metal surfaces.
Always place Iron with Soleplate resting on Heat-Resistant Pad -
never resting on its heel.
10
Rinsing Out Water Tank/Boiler
Never use descaling agents!
To ensure optimum steam performance, the Boiler must be cleaned
every 10 uses (if water is hard, increase cleaning frequency).
Never fill Water Tank directly from tap!
Be sure Steam Generator Iron is unplugged and cold
before performing this task...
• Empty any excess water from Boiler into sink.
• Fill Boiler 3/4 full with tap water, using funnel provided.
• Shake for a few moments, then empty contents in sink.
• Repeat above steps.
• Wipe Steam Generator Iron with damp cloth & wipe dry.
Never submerse Steam Generator Iron in water!
10
Using Your Iron & Maintenance & Cleaning