miniland baby digimonitor 8 plus Mode D'emploi page 36

NIGHT MODE:
If you have selected "night mode" in the Set up menu, once the camera is on
standby and the photo frame has gone to the Select page mode, if there is no
noise detected by the camera during around in 3 minutes, the screen will
automatically switch off.
This mode is particularly useful at night as even though the photo frame is
connected to the monitor no sound is emitted, helping you to sleep more easily.
Whenever a noise is detected the camera will resume the transmission of image
and sound.
To disable this function and view the monitored area continuously you must select
CAMERA mode on the camera.
5.2.2.4. Fotografía
Selection of Photo mode
When slide show, press the [Exit] button.
· Full screen photo view, press the [Exit] button.
· In mode select page , select "Photo mode", press the [Enter] button
The photo frame will slide show photo if the media card is inserted.
If there more than one card inserted, the slideshow priority sequence is
(from High to low): SD/MMC/MS/XD> USB >Build in Memory
Photo mode options
· Press the [Left] or [Right] button to select the photo to browse.
· Press the [Up] or [Down] button to browse photo in the previous or next page.
· Press the [Enter] button to view selected photo in full screen.
· Press the [select card] button to browse the photo in the next card if you have one.
· Press the [Volume+] button to select some photos for Copy/Delete /slideshow
· Press the [Slideshow] button to slide show chosen photo in selected card.
If no button is selected, it will show all photos. If there are no photos, it cannot
enter slide show.
· Press the [Exit] button to return to select mode page
· Press the [Setup] button, to configure some Function related to photos.
For operation, please see Sys Setup page.
All manuals and user guides at all-guides.com
36
English