LGB Abe 8/12 Allegra Serie Mode D'emploi page 7

Installing a Coupler
• Unscrew the large and small snowplow (Figure 6 & 7).
• Install the coupler.
Caution, danger of injury: There are still sharp edges.
All manuals and user guides at all-guides.com
SERVICE
Lubrication
The axle bearings should be lubricated occasionally with a small amount of LGB
Märklin-Oil (7149).
Changing Traction Tires
A wheel set must be removed in order to change its traction tire:
• Loosen 4 screws on the powered truck frame.
• Remove the axle mount and remove the wheel set (note the order of installation).
• Change the traction tire.
• Install the axle again.
• Install the axle mount again.
7
Caution: The electrical wheel pickups are easily damaged during this process.