Important information
Carefully read the installation instructions in full before
installation.
Please keep instructions for future reference and hand them over
to any new user.
Safety
• If repair work is needed, disconnect mains supply and ensure
that it cannot be reconnected unintentionally.
• Only use a bulb compatible with the light fixture. It must not
exceed the stated electrical power.
• If the cable is damaged, disconnect mains supply and contact a
qualified electrician.
• Do not use incandescent bulbs due to accumulation of heat.
Installation
• Installation must be made by a certified electrician and/or with-
in the guidelines of the National Electrical Code.
• The light kit is for indoor use only.
• When connecting the cable, the junction box or outlet box must
be accessible after installation.
• Insert a bulb (not supplied) into the light fixture. Recommended
bulbs are listed on the product labels and in the Maintenance
and service section of these instructions.
Product
• The light kit has been designed for use with genuine VELUX sun
tunnels. The connection to other products may cause damage or
malfunction.
• The light kit has been designed with UL listed parts and is UL
recognized with some conditions for acceptablity.
Labels
The two enclosed labels with important information about rec-
ommended bulbs for light kit ZTL must be installed on the ceiling
ring. These labels must be visible when accessing the light kit for
bulb replacement.
2 VELUX
®