GPO US ATTACHE Mode D'emploi page 9

Vinyl Recording Mode
1. Connect the small DC jack into the DC-IN port on the rear
of the unit.
2. Connect the plug to a mains outlet and turn the power
socket on.
3. Plug a blank USB drive into the USB slot.
4. Use the mode select button until the LED indicator shows
that you have selected recording mode:
5. Place your chosen vinyl record onto the turntable and begin
playback as described above.
6. Press the record button on the unit's control panel. The LED
light will now begin to flash.
7. Press the record button once to record the vinyl as a
continuous track. Press the record button twice to split the
tracks.
RCA Audio Out
An RCA cable is included with your GPO Attaché. You can use
this cable to connect to external speakers using the AUX-OUT
socket on the rear of the unit.
GPO_Attaché_EU_Manual_MARCH_2017.indd 9
All manuals and user guides at all-guides.com
9
06/03/2017 12:25