Publicité
Les langues disponibles
Les langues disponibles
10. Troubleshooting
In purchasing the cordless drill / screwdriver, you have acquired a product which has been designed to the state of the art and is operationally
reliable. However, problems and faults can occur. Therefore at this point we would like to explain to you how you can rectify possible faults.
Observe all safety instructions contained in these operating instructions without fail!
Problem
Device not functioning
On/off switch cannot be pressed
When drilling a drill progress
cannot be observed.
For unscrewing or tightening
a screw the cordless drill /
screwdriver vibrates.
Only slow rotation of the drill
chuck
Drill chuck loose
11. Technical Data
a) Plug charging set
Operating voltage:
220 V~240 V/ 50Hz
Output voltage:
20.6 V=
Power consumption:
1.00 W (Standby), 85 W max. (Charging)
b) Cordless drill / screwdriver
Accumulator:
B2033L
-Voltage:
18 V=
-Type:
Li-ion
-Capacity:
1.3 Ah
Charging time:
~30 mins
Operating time:
~15 mins (fully charged battery)
Current consumtion:
8 - 12 A
Torque levels:
20
Max. Torque:
35 Nm
Drilling modes:
2
Speed levels:
2
No load speed:
0-400 / 0-1400 rpm
Blows per minute:
21000 bpm
Chuck capacity:
13 mm
Dimensions:
61 x 225 x 210 mm
Weight:
1449 g
c) Vibration / noise development
Sound pressure level:
76.24 dB(A)
Sound power level:
87.24 dB(A)
Acceleration:
13.93 m/s
28
Possible solutions
•
Is the accumulator empty?
•
Set the forward / reverse control button (4) to the position left or right. In the central position it
blocks the variable speed switch (7) !
•
Check the sense of rotation of the drill, switch the forward / reverse control button (4) to the other
position.
•
Use another drill.
•
Adjust the torque adjustment collar in such a way that the required torque is available
•
Is the accumulator weak?
•
Tighten the Allen head screw inside the chuck using an Allen key.
2
Publicité
