Publicité
8
HOOD
HOOD
CURTAIN
MESH
The curtain mesh must be kept fully closed during operation
to help prevent accidental burns from occurring.
FIGURE 13
The heater must not be used when the hood is re-
moved.
Hook the hood over the lip of the curtain support
plate.
W415-0369 / E / 02.16.07
R e m o v e
FIGURE 12
backing of the
l o g o s u p p l i e d
and place on the
screen cover, as
indicated.
FIGURE 14
FIGURE 15a-c
A
B
(VALVE CONTROL DOOR)
HINGE SCREEN
C
HINGE SCREEN: Position the hinge screen into place and
with the control door open, secure to the fi rebox using three
screws.
LOGO PLACEMENT
t h e
LOUVRE INSTALLATION
UPPER LOUVRES: Insert
the upper louvres into the
HOOD
slots on both brackets.
Press the top flange of
BRACKET
the hood into the four clips
SLOT
located along the top of
the unit as shown.
LOUVRE
LOWER LOUVRES: At-
tach each hinge to the
fi rebox with 2 screws.
LOWER LOUVRES
Publicité
