Publicité
Les langues disponibles
Les langues disponibles
USE
Operation
Saturated grease filters
EN 6
Switching the fan on and off
1. Switch the fan on by touching the On/Off key.
2. Select the required extractor speed by touching the speed keys or
one of the Intensive speed keys.
• Intensive speed 1 will automatically switch back to the most
recently set extractor speed after 8 minutes.
• Intensive speed 2 will automatically switch back to the most
recently set extractor speed after 7 minutes.
3. Switch the fan Off by touching the On/Off key.
Switching the lighting on and off
1. Touch the light key.
▷ The lighting come on.
2. Touch the light key again.
▷ The lighting goes off.
After 4 hours of not operating the cooker hood will switch itself off
automatically.
When starting extraction the grease filter saturation indicator light up for
5 seconds in a colour that indicates the level of filter saturation:
• Green: 0-75% saturation
• Oranje: 76-99% saturation
• Red: Grease filter has to be cleaned (see chapter 'Maintenance')
Reset
1. The extractor hood is off (motor and lighting).
2. Switch on the fan with the on/off key and select speed 1.
3. Immediately afterwards, touch and hold the 'grease filter saturation'
key, until a reset has taken place; the saturation indicator is then off.
Do not reset the memory until the maintenance work on the filters
has been completed.
Publicité
