Team Orion ProSpec Advantage Mode D'emploi page 5

Introduction
profiles so that different settings for different battery packs can be stored. We have pre-programmed
several of the memories to suit the most popular battery types. For LiPo and LiFe batteries, the charger
is also equipped with 2mm balancing connectors and XH type balancing harness for 2S to 6S batteries.
Please read the instructions carefully to ensure that you receive maximum performance and reliability.
6
All manuals and user guides at all-guides.com
Thank you for choosing Team Orion's Advantage Race
charger. This charger features the latest developments
in battery charging technology. It is designed to charge
and discharge NiMH, NiCd, LiPo and LiFe batteries
in the most efficient way possible. Its design is based
on Team Orion's world championship winning battery
technology.
We have included a special storage charge function to
partially recharge your NiMH, LiPo and LiFe batteries
prior to storage. Doing so will greatly increase their
lifespan. The charger also features 10 user memory
Team Orion Advantage Pro Spec
Power Source
www.teamorion.com
Connect the charger to a stable 10-15VDC power source
(power supply, car battery, etc.), respecting the polarities,
red is positive (+) and black is negative (-).Make sure
the power source is able to supply enough power to
charge the battery at the desired charge rate. The power
required is obtained by multiplying the battery charge
end voltage by the charge amps, for example 2S LiPo =
8.4Vx10A=84W power source required.
Picture shows Race Spec charger
7