EUROM SL20 Cube Manuel D'utilisation page 10

Attention!
 Do not feed chemicals or solids through the hose and do not allow the exterior to
come into contact with corrosive substances or sharp objects that could damage
it.
 After use, always allow the water to flow out of the hose and roll the hose onto
the reel. Water that is heated by the sun and/or high water pressure can damage
the interior of the hose.
 The hose becomes less flexible at very low temperatures. Ensure that no water
remains in the hose that can freeze. Bring the reel indoors in cold weather!
 This hose reel is not suitable for the transport of drinking water!
Cleaning and maintenance
 If the hose is dirty, clean it with a (slightly damp) cloth before you roll it back
onto the reel. Ensure that the hose is dry when you roll it in, so that no moisture
can become trapped in the reel!
 If necessary, you can also clean the housing with a damp cloth. Do not use
corrosive cleaning agents or chemicals that damage the material! Never
submerge (parts of) the reel in water!
 Mounting the reel under cover lengthens the life span. If it is exposed to rain and
sunlight, both the metal and the plastic parts and the winding mechanism are
subject to erosion, which affects the life span.
 Never expose your reel to frost. Certainly not when there may be water in the
hose!
 We recommend that you store your reel when you are not using it, and certainly
outside the season.
 If, after some time, it is difficult to roll the hose in, the spring may have lost
tension. This must then be adjusted. Contact your service point for this.
 The reel does not have any interior parts on which you can or are permitted to
conduct maintenance. In the case of faults or defects, contact your supplier or
service point. Never open the housing!
Removal
All manuals and user guides at all-guides.com
In the EU this symbol indicates that this product may not be
disposed of as ordinary household waste. Old equipment
contains valuable materials, suitable for recycling. These
materials should be made suitable for reuse in order to prevent
any adverse effects to health and the environment caused by
unregulated waste collection. Therefore, please make sure that
you bring old equipment to a designated collection point.
Alternatively, contact the original supplier, who can make sure
that as many of the components as possible can be recycled.
10