Publicité
Les langues disponibles
Les langues disponibles
STEP 12
Carefully turn your unit on its front side.
Attached the back panel as shown nailing straight into the raw edges.
Assure that the unit is square.
Distance from corner to corner must be equal as shown.
Assure that our unit is square.
Distance from corner to corner
must be equal as shown.
systembuild.com
IMPORTANT! THE BACK PANEL IS A STRUCTURAL PART OF THIS UNIT
10
AND MUST BE INSTALLED PROPERLY.
(x40)
H
finished edge
19
10
Flush bottom edge of the back
panel with the bottom edge of
bottom (E).
You
Tube
Publicité
