Publicité
Les langues disponibles
Les langues disponibles
LP (Liquid Propane) gas supply connection
• Always confirm that the burner control knob is in the "OFF" position before connecting the gas
supply.
• Do not obstruct the flow of combustion air and ventilation air to the appliance.
To Connect:
• Ensure that there is no debris caught in the head of gas cylinder, head of the
regulator valve.
• Insert the nipple of the valve coupling into the cylinder valve and tighten
the black coupling nut by turning it clockwise with one hand while
holding the regulator with the other hand. (See Figure H.)
Hand tighten only.
To Disconnect:
• Always confirm that the cylinder valve is in the
"OFF" position before disconnecting the gas
supply.
• Hold the regulator with the one hand and loosen the
black coupling nut by turning it counter- clockwise
with the other hand. (See diagram.)
IMPORTANT
• Disconnect the propane cylinder from the regulator valve when the appliance is not in use.
SELECTING A LOCATION
Always place this outdoor appliance on a hard, level non-
combustible surface such as concrete, rock or stone.
Minimum Clearance from Unit to Combustible Materi-
als 72"(182.9cm) from the top; 48" (121.9 cm) from all
sides and back. Do not locate this appliance under any
overhead enclosure. Position the appliance so that you
have easy access to the control knob.
VISUAL CHECK
Prior to each use, check the hose and valve for excessive wear, abrasions or any damage.
6
H
Publicité
