Télécharger Imprimer la page

BOND MANUFACTURING BH7001-4 Guide D'utilisation page 4

Publicité

Les langues disponibles

Les langues disponibles

appliance. For assistance with repair or replacement of the hose, call Bond Manufacturing at
1-866-771-2663.Use only replacement parts from the manufacturer.
Caution: This heating item should not be used on plastic composite or artifcial wood decks.
WARNING: LAVA ROCK USE
1. Do not light or use gas appliance if lava rocks are wet. Ensure lava rocks are completely
dry before lighting as intense heat could cause the lava rocks to crack.
2. Lava rocks could hit somebody' face or eyes during the initial start of this unit, so
please keep away from the appliance for the first 20 minutes after it has been ignited.
WARRANTY AND INSTALLATION INFORMATION
The Bond warranty will be voided by and Bond disclaims any responsibility for the following actions:
1. Modification of the firebowl and/or components including the gas valve assembly.
2. Use of any component part not manufactured or approved by Bond.
3. Use and installation other than as instructed in this manual.
ACCESSORIES
ITEM
DESCRIPTION
A
Lava Rocks
B
Battery (AAA)
C
Body
D
Tank seat
E
PVC cover
ASSEMBLY INSTRUCTIONS
*Please keep the owner's manual for future reference
*If you have opened the carton and removed all packages, please disregard the STEP 1, See
the STEP 2 directly
STEP 1 -A
(1) Open the carton and turn it upside
down, make sure the 4 pieces of the
carton being open up as below.
(2) Lift off the carton carefully and be
wary of the accessories inside falling
away. Take away the boxes
containing lava rocks.
(3) Take all the packing materials
away except for the paper
honeycomb board rounding the
firebowl.
STEP 1 -B
(1) Turn the firebowl heads up on a flat ground.
(2) Cut off the binding tape on the paper honeycomb board and remove all the paper honeycomb
board rounding the top of the firebowl.
(3) Cut off the tie fastened the regulator at the metal stand and set it free for installation to propane
tank.
QTY
2boxes
1pc
1pc
1pc
1pc
4

Publicité

loading

Produits Connexes pour BOND MANUFACTURING BH7001-4

Ce manuel est également adapté pour:

67906