BOND MANUFACTURING BH7001-4 Guide D'utilisation page 5

STEP 2
(1) Check each part before using the
product. Make sure the gas supply
system is turned "OFF" before as-
sembling. See Figure C.
(2) Take away the boxes containing
lava rocks. See Figure C.
(3) Put the gas tank in the metal stand.
Make sure the gas tank sits on the
metal stand completely. Turn the
wing screw on the outer part of
metal stand clockwise to secure the
gas tank tightly. See Figure F, G.
(4) Locate the battery and remove the
plastic cover first. Unscrew the
rubber cap of the Electric Igniter,
place a AAA battery into the
case. Make sure the
pole ("+") towards the cap.
Screw the cap back to the battery
case tightly. See Figure D.
(5) Evently distribute the lava rocks on the
top of the firebowl. See Figure E.
WARNING:
** DO NOT COVER THE IGNITION
SCREEN when placing the lava rocks into
the fire bowl. Always keep Ignition
Screen visible. This screen must be clear
and free of obstructions at all times to in-
sure proper operation.
The burner of the firebowl must be
covered by lava rocks completely.
Otherwise the flame may be
extinguished partially. See the Figure
CORRECT and INCORRECT ways for
reference.
positive
5
2
C
D
F
CORRECT
E
G
INCORRECT