Télécharger Imprimer la page
Delta TOUCH2O 9113T-DST Serie Mode D'emploi
Delta TOUCH2O 9113T-DST Serie Mode D'emploi

Delta TOUCH2O 9113T-DST Serie Mode D'emploi

Robinet à bec rétractable pour évier d'îlot, de bar et de cuisine

Publicité

Liens rapides

Models/Modelos/Modèles
CASSIDY™, DOMINIC
, TRINSIC
®
MATEO
Write purchased model number here.
Escriba aquí el número del modelo comprado.
Inscrivez le numéro de modèle ici.
You may need/Usted puede necesitar/Articles dont vous pouvez avoir besoin:
3/32" (2.38 mm)
For easy installation of your
Delta
faucet you will need:
®
• To READ ALL the instructions completely
before beginning.
• To READ ALL warnings, care, and maintenance
information.
Para instalación fácil de su llave
Delta
usted necesitará:
®
• LEER TODAS las instrucciones completamente
antes de empezar.
• LEER TODOS los avisos, cuidados, e
información de mantenimiento.
Pour installer votre robinet
Delta
facilement, vous devez:
®
• LIRE TOUTES les instructions avant de débuter;
• LIRE TOUS les avertissements ainsi que toutes
les instructions de nettoyage et d'entretien.
To access additonal technical documents & product info, visit www.deltafaucet.com/p/Your-Model-Number-Here
(example: www.deltafaucet.com/p/9159T-DST)
Para acceder a documentos técnicos adicionales e información sobre el producto, visítenos en www.deltafaucet.
com/p/Your-Model-Number-Here (ejemplo: www.deltafaucet.com/p/9159T-DST)
Pour avoir accès à des documents techniques supplémentaires et à de l'information sur le produit, visitez www.delta-
faucet.com/p/Votre-numéro-de-modèle-ci (exemple : www.deltafaucet.com/p/9159T-DST)
92519
,
®
, ESSA
®
®
& TRASK™
®
TOUCH
O
PULL-OUT KITCHEN & BAR/ PREP FAUCET
2
LLAVE DE AGUA/GRIFO EXTRAÍBLE TOUCH
COCINAS Y FREGADEROS PARA PREPARATIVOS/
BARES
ROBINET TOUCH
O
2
ÉVIER D'ÎLOT, DE BAR ET DE CUISINE
9113T-DSTs
9159T-DSTs
9913T-DSTs
9959T-DSTs
1
®
À BEC RÉTRACTABLE POUR
9183T-DSTs
9983T-DSTs
19933T-DSTs
?
www.deltafaucet.com
1-800-345-DELTA (3358)
customerservice@deltafaucet.com
®
O
PARA
2
9197T-DSTs
9997T-DSTs
19940T-DSTs
02/09/2017
Rev. A

Publicité

loading

Sommaire des Matières pour Delta TOUCH2O 9113T-DST Serie

  • Page 1 Para acceder a documentos técnicos adicionales e información sobre el producto, visítenos en www.deltafaucet. www.deltafaucet.com com/p/Your-Model-Number-Here (ejemplo: www.deltafaucet.com/p/9159T-DST) 1-800-345-DELTA (3358) Pour avoir accès à des documents techniques supplémentaires et à de l’information sur le produit, visitez www.delta- customerservice@deltafaucet.com faucet.com/p/Votre-numéro-de-modèle-ci (exemple : www.deltafaucet.com/p/9159T-DST) 02/09/2017...
  • Page 2 Delta ® Esta es la garantía exclusiva por escrito de Delta Faucet Company y la garantía no es transfer- ible. Delta Faucet Company no será responsable por cualquier daño a la llave de agua que resulte del mal uso, abuso, negligencia o mala instalación o mantenimiento o reparación incorrecta, incluy-...
  • Page 3 ® ESSA Models/Modelos/Modèles RP80521s Bar Spout Assembly with Magnet 9113T-DST & 9913T-DST Ensamble del Tubp de Salida RP80520s Kitchen Spout Assembly with Magnet Ensamble del Tubo de Salida RP74836 Cartridge Assembly Ensamble del la Válvula RP60923 Soupape Retainer RP80977 Funda Wand Retainer &...
  • Page 4 TRINSIC ® & TRASK Models/Modelos/Modèles RP71656s 9159T-DST, 9959T-DST & 19933T-DST Bar Spout Assembly with Magnet Ensamble del Tubp de Salida RP71655s Kitchen Spout Assembly with Magnet Ensamble del Tubo de Salida RP74836 Cartridge Assembly Ensamble del la Válvula Soupape RP60923 Retainer RP80619 RP80977...
  • Page 5 MATEO ® Models/Modelos/Modèles 9183T-DST & 9983T-DST RP81911s RP81910s Bar Spout Assembly with Magnet Kitchen Spout Assembly with Magnet Ensamble del Tubp de Salida Ensamble del Tubo de Salida RP73000 Cartridge Assembly RP60923 RP80977 Ensamble del la Válvula Retainer Wand Retainer & Replacement Kit Soupape Funda Soporte para el mango y piezas de...
  • Page 6 CASSIDY Models/Modelos/Modèles 9197T-DST & 9997T-DST RP72681s Bar Spout Assembly with Magnet RP72679s Ensamble del Tubp de Salida Kitchen Spout Assembly with Magnet Ensamble del Tubo de Salida RP73000 Cartridge Assembly Ensamble del la Válvula Soupape RP60923 RP80977 Retainer Wand Retainer & Replacement Kit RP80619 Funda Soporte para el mango y piezas de...
  • Page 7 ® DOMINIC Models/Modelos/Modèles RP80977 19940T-DST Wand Retainer & Replacement Kit Soporte para el mango y piezas de RP80227s repuesto Kitchen Spout Assembly with Magnet Trousse de Rechange et pièce de Ensamble del Tubo de Salida Retenue de Douchette RP60911 RP74836 Clip Cartridge Assembly Presilla...
  • Page 8 EP92546 Solenoid Assembly Ensamble de Solenoide Électrovanne For PC, SS, AR & KS finishes, order EP92546 For PL, MW, RB & SP finishes, order EP4855XX Para acabados PC, SS, AR y KS, ordene EP92546 RP13938 Para acabados PL, MW, RB y SP, ordene EP4855XX O-Ring (2) Anillo “O”...
  • Page 9 Mount Faucet to Deck Insert faucet tubes and shank through Secure faucet to sink with mounting bracket (2) mounting hole in sink; and, place faucet (1) and nut (3), mount underneath sink, hand tighten. over mounting hole. Ensure that the light at the Tighten securely using wrench (4).
  • Page 10 OPTIONAL / OPCIONAL / FACULTATIVE OPTIONAL / OPCIONAL / FACULTATIVE Optional Escutcheon Installation Optional Escutcheon Installation Models: 9113T, 19933T and 19940T only. Models: 9159T, 1983T and 1997T only. For optional installations using the 10 1/2” For optional installations using the 10 1/2” escutcheon, order RP92233 (specify finish) not escutcheon, (specify finish) not supplied.
  • Page 11 Loop tubing created. Delta is not responsible for tubing that is l Tubing is cut too short: buy a coupling union and a (9) if it is too long. Note: Recommended tubing...
  • Page 12 Correct method Incorrect Installation Instalación Incorrecta Método Correcto Installation Incorrecte Bonne méthode Do not install sleeve Ensure cut is straight. upside down. No instale la manga Asegúrese que el corte boca abajo. esté recto. Custom Fit Connections - Plastic Sleeve Installation Instructions 1.
  • Page 13 Flush Supply Lines Solenoid Installation Because your sprayer has been factory assembled to the hose, Slide tube (15) into the top solenoid nipple (16). Rotate clip (17) over tube and nipple we do not recommend removing to flush the lines. Instead, if to secure connection.
  • Page 14 Push clip (21) onto shank as shown to ensure clip is tight onto shank. Ensure LED Push hose end (19) onto solenoid assembly outlet (18). Attach clip (20) over hoses wire (22) is properly pushed in to solenoid. Make sure wire extends away from as shown.
  • Page 15 “AA” Batteries (Last up to 2 years) Pilas “AA” (Duran hasta 2 años) Piles « AA » (Durée utile de 2 ans) “C” Batteries (Last up to 5 years) Pilas “C” (Duran hasta 5 años) Piles « C » (durée utile de 5 ans) Important: Place batteries in holder, secure cap and lay on cabinet floor as shown in Step 9.
  • Page 16 El capuchón puede estar tieso como resultado del aro O, pero debe girar a mano. Quite la tuerca tapa (6) girando en dirección contraria a las manecillas Sugerencias rápidas para su llave de agua/grifo Delta Touch del reloj con una llave de tuercas. Quite el cartucho (7) halando la espiga ®...
  • Page 17 Solenoid Troubleshooting Note: Normal operation of the faucet will turn off water flow if faucet is not touched for 4 minutes. 1. If your spout flashes a red light on then off and then keeps repeating this, replace the batteries. If the spout still flashes a red light, please replace solenoid and electronics kit**.
  • Page 18 92519 Rev. A...
  • Page 19 92519 Rev. A...
  • Page 20 92519 Rev. A...