Télécharger Imprimer la page

Costway FP10130WL Mode D'emploi page 6

Publicité

Les langues disponibles

Les langues disponibles

Recommended Temperature Settings
Storing wines at the proper temperature is important. To preserve them as long as
possible, wine needs to be stored at approximately 55° Fahrenheit. However, the chart
below suggests the optimal drinking temperature for the different varietal of wine.
Wine Varietal
Rose and Sparkling Wines
Dry/White Wines
Red Wines
Storage
This wine cooler is designed to store standard Bordeaux 750 ml wine bottles. Many
bottles differ in size and dimensions. As such, the actual number of bottles you may be
able to store may vary. Storing large and/or oddly shaped bottles (including champagne
and sparkling wine bottles) will decrease the capacity of your wine cooler.
Door Lock
This cooler can be secured with a lock and key. The keys are located inside the plastic
bag that contains the Instruction Manual. Insert the key into the lock and turn it
clockwise to lock the door, making sure the metal pin is engaged completely. To unlock
the door, do the reverse. Remove the key and put it in a secure location.
Beech Shelves
This wine cooler is equipped with a sliding rail assembly and you can move the wooden
shelves out and in smoothly. The slide-out shelves allow bottles of wine to be viewed
and removed more easily. Any of the shelves can be removed to store larger bottles.
To prevent damaging the door gasket, make sure to have the door all the way opened
when pulling shelves out of the rail compartment. For easy access to the bottles, you
may need to pull the shelves approximately 1/3 out of the rail compartment.
To Remove a Sliding Shelf
1. Remove all bottles from the shelf.
2. Pull the shelf out as far as it will go.
3. Adjust the lever on each side of the shelf, as shown below (UP on the left, DOWN on
the right) and at the same time, pull the shelf out completely.
10
°F
°C
41°F-46ºF
5°C-8ºC
48°F-53ºF
9°C-12ºC
59°F-65ºF
14°C-18ºC
CARE & MAINTENANCE
Cleaning Your Wine Cooler
IMPORTANT: Always unplug the cooler before cleaning or performing maintenance.
Never use harsh cleansers or scouring pads to clean any part of the cooler.
• Turn off the power, unplug the wine cooler, and remove all items including shelves.
• Wash the inside surfaces with warm water and baking soda solution. The solution
should be about 2 tablespoons of baking soda to a quart of water.
• Wash the shelves with a mild detergent solution.
• Wring excess water out of the sponge or cloth when cleaning the area near the
controls, or any electrical parts.
• Wash the outside cabinet with warm water and a mild liquid detergent. Rinse well and
wipe dry with a clean soft cloth. Do not use steel wool or steel brush to rub the stainless
steel, which will contaminate the stainless steel with steel particles and rusting may
occur.
Power failure
Most power failures are corrected within a few hours and should not affect the
temperature of your wine cooler. If the power is off for an extended period of time,
proper steps should be taken to protect your contents.
Vacation Time
Leave the wine cooler running for less than three weeks on vacation. For periods longer
than this, turn the wine cooler off and leave the door slightly ajar to prevent odor from
building inside the wine cooler.
Moving Your Wine Cooler
- Remove all items (bottles) from the cooler;
- Securely tape down any loose items, such as shelves, inside the cooler.
- Turn the adjustable leg up to the base to avoid damage.
- Tape the door shut.
- Ensure that the wine cooler stays securely in the upright position during transportation.
Protect the outside of the wine cooler with a blanket or a similar item.
11

Publicité

loading