All manuals and user guides at all-guides.com
SAFETY INFORMATION
DANgER :
Failing to follow the precautions below may result in serious injury or even
death.
•
Do not use a damaged power plug or loose electric outlet.
•
Please connect the power plug to a dedicated grounded electrical outlet for 120 V, 60 Hz.
•
Do not move the product by pulling only the power cord.
•
Do not handle the power plug with wet hands.
•
Do not forcefully bend the power cord or place it under a heavy object to prevent it from being
damaged or deformed.
•
Do not repeatedly connect and disconnect the power plug.
•
If the electrical outlet is wet, carefully unplug the product and let the electric outlet dry
completely before subsequent use.
•
Make sure to unplug the product before repairing, inspecting or replacing a part.
•
Remove any dust or water from the power plug.
•
Do not plug the product into an electrical outlet or power strip that is being used by several other
appliances. Use an electrical outlet dedicated to the product.
•
Unplug the system if it is not used for a long time.
•
Do not attempt to repair or modify the power cord yourself.
•
If the power cord is damaged, do not replace the cord yourself. Call a service center to have it
replaced.
•
Do not install the product near a heating device.
•
Do not install the product in locations exposed to moisture or water (rainwater).
•
Do not use the product in areas where flammable gases or combustible materials are used or
stored.
•
Do not insert sharp objects such as a gimlet into the pollution sensor.
•
If the product produces a strange noise, burning smell or smoke, unplug it from the electrical
outlet immediately and call our service center.
•
Never place the product in water.
•
Do not spray any flammable materials such as insecticides or air fragrances near or into the air
inlet.
•
Do not disassemble, repair, or modify the product at your own discretion.
•
Do not place any containers with water, medicine, food, metallic objects or flammable material
on top of the product.
•
Unplug the system before cleaning it.
•
Clean by spraying water directly and do not clean the product using benzene or thinner.
•
Use the product for home or business use according to the model.
•
Do not use the air purifier in a factory or industrial setting where machine oil may be present in
the air.
2