RS Pro RS-833 Manuel D'instructions page 4

Heavy Duty InfraRed Thermometer / English
7.Front Panel Description
1. IR sensor
2. LCD Display
3. up button
4. down button
5. mode button
6. Measurement Trigger
7. Handle Grip
8. Battery Cover
7-1.Indicator
1. Scan symbol
2. Data hold
3. Laser "on" symbols
4. High alarm and low alarm symbol
5. ºC/ºF symbol
6. Low power symbols
7. Emissivity symbol
8. Emissivity value
9. Temperature values for the MAX/ MIN/ DIF/ AVG
10. Symbols for MAX/ MIN/ DIF/ AVG
11. Current temperature value
4
7-2.Buttons
1. Up button (for EMS, HAL, LAL)
2. Down button (for EMS, HAL, LAL)
3. MODE button (for cycling through the mode loop)
8. Functional Design
1. In the measuring time up, down keys to adjust the Emissivity.
2. IN the hold time, up keys to turn on or off the laser, Down keys to turn on or off the
backlight.
3. IN the hold time, MODE button to change MAX/MIN/DIF/AVG
4. To set values for the High Alarm (HAL), Low Alarm (LAL) and Emissivity (EMS), press and
hold the MODE button until the appropriate code appears in the display, press the UP and
down buttons to adjust the desired values.
9. MODE Button Function
• Press the mode button also allows you to access
the set state,Emissivity(EMS), C/F, HAL on/off,
HAL adjustment LOW on/off, LOW adjustment,
Each time you press set you advance through the
mode cycle.
• The diagram shows the sequence of functions in
the mode cycle.
• EMS adjustment. The Emissivity(EMS) digitally
rspro.com rspro.com
Heavy Duty InfraRed Thermometer / English
EMS
°C/°F
HAL on/off
MODE
HAL
LOW on/off
LOW
5