Battery Test - Amplicomms DB 200plus Mode D'emploi

instrument. Trying the different settings will help you know your preferred cycle length.
If required press the REFRESH button to activate the UV light for one hour. This may be repeated as required.
When the UV lights are on, the indicator light (8) is ON. The UV lights help inhibits bacteria growth in the
hearing aids, which can be caused by excess humidity during normal use.
CAUTION: Do not look directly at the two UV lights located in the corners of the main compartment.
The unit has an automatic shut-off when the lid is opened. If the drying process is to be continued, please
close the lid and restart as described above.

Battery test

1. Place a battery on the battery tester. Ensure the smaller round battery contact (-) is placed on the gold disc
of the tester.
2. Press the battery so that its body (+) is pressed against the vertical gold terminal.
3. Battery capacity (power) is indicated by the number of indicators that light up.
4 or 5 indicators means the battery has good capacity remaining.
1 or 2 indicators means the battery has marginal capacity and should be replaced soon.
Note: Before testing a new battery, remove battery tab and wait two minutes.
10
Helpline UK 0844 800 6503
(See page 14 for costs and hours of operation)