Amplicomms DB 200plus Mode D'emploi page 12

2. Set humidity selector (5) for the following drying times:
- "Low Humidity" (left position) = 2 hours
- "Normal Humidity" (central position) = 4 hours
- "High Humidity" (right position) = 8 hours
3. Open the hearing aid battery cover to expose the battery. You can remove the batteries during the drying /
refreshing cycle. Remember to replace the batteries in your hearing aid after completion of the drying /
refreshing cycle.
4. Place hearing aids in the main compartment (1) and close the cover.
5. Press ON / OFF button (9) to start the selected drying time. The indicator (10) is ON.
Important notes:
This product helps to dry excess moisture from hearing aids and CI receivers using gentle heat. The UV
light function helps reduce bacteria growth. The product does not clean your instrument. Cleaning from
solid debris must still be done separately in accordance with your hearing aid manufacturer's instructions.
The frequency of using the product is a personal preference. You may use the product daily, weekly, or as
often as you find appropriate. This also differs according to the type of instrument you use.
Use the 3 timer settings to determine the most suitable length of treatment for your device. This differs
from one instrument to another, and depends on varied factors such as humidity level present, type of
Helpline UK 0844 800 6503
(See page 14 for costs and hours of operation)
9