Battery Test - Amplicomms DB 100plus Mode D'emploi

O A
NHANG PERATION
Optional you can press the REFRESH button to activate the UV light for
one hour. During this, the indicator (8) is ON.
CAUTION: Do not look directly at the two UV lights on the front corners
of the chamber.

Battery test

1. Place a battery against battery tester terminals. Make sure the smaller
round battery contact (-) is placed on the gold disc.
2. Press the battery so that its body (+) is pressed against the vertical gold
terminal.
3. Battery capacity is indicated by the number of indicators that light up.
4 or 5 indicators means the battery has good capacity remaining.
1 or 2 indicators means the battery has marginal capacity and should be
replaced soon.
Note: Before testing a new battery, remove battery tab and wait two minutes.
10
Helpline UK 0844 800 6503
(See page 14 for costs and hours of operation)