Tommee Tippee goprep Manuel D'instructions page 2

EN | IMPORTANT WARNINGS!
These instructions can also be found at www.tommeetippee.com
Keep this instruction sheet for future reference as it includes
important information.
• Flask can contain boiling water – a potential scalding hazard.
Ensure lids are securely fastened. Open with care. Always use
on a flat surface.
• Adult use only.
• Please keep out of reach of children.
• Inspect before use. Throw away at first signs of damage or
weakness.
• Do not use to store or carry carbonated drinks.
• Always check food temperature before serving and feeding.
• When making up a feed, follow the formula manufacturer's instructions.
• Do not use in a microwave oven.
• Do not use with any other liquid than water in the preparation of a
formula feed.
• In order to minimise bacterial growth do not use to keep warm milk
products. Use only as directed in HOW TO USE section.
• Using the cooling flask shortly after heating in any way may cause
excessive external temperatures and risk of burns. Always allow the
cooling flask to reset before use and handling (3 - 4 hours). Handle
freshly boiled water carefully. Handle the cooling flask carefully as
the base will heat up when in use. Use the cooling flask in a safe
environment, away from baby. Leave the cooling flask to cool after
steam sterilisation.
STORAGE
• Do not store in direct sunlight or near a source of heat.
• Do not store with or allow to come into contact with solvents
or harsh chemicals.
• Keep all components not in use out of reach of children.
• Do not leave in direct sunlight or heat, or leave in disinfectant
(sterilising solution) for longer than recommended as this may
weaken the product.
DO
✓
DO: use, sterilise and
reset.
Reset time for the
cooling flask is
3 - 4 hours
(depending on
sterilising and cleaning
type).
The cooling flask works
by absorbing heat from
hot liquids. After being
exposed to heat, it will
require some time to
cool before being ready
to use again.
DO: tilt the cooling
flask upside down,
ensuring it is
assembled correctly, to
check the temperature,
remember the star will
go blue when the feed
is ready
(minimum cooling time
of 2 minutes)
DON'T
✗
DON'T: dispense
the feed before
2 minutes
DON'T: store a
made-up feed
in the flask
DON'T: panic if you
hear a crackling
sound when making
your feed. This is
the cooling flask in
action