Publicité
Les langues disponibles
Les langues disponibles
TROUBLESHOOTING
Symptom
Sound cannot be heard.
"MISWIRING CHK WIRING THEN
RESET UNIT" / "WARNING CHK
WIRING THEN RESET UNIT"
appears and no operations can
be done.
Source cannot be selected.
Radio reception is poor. / Static
noise while listening to the radio.
Correct characters are not
displayed.
Playback order is not as intended.
Elapsed playing time is not
correct.
"NOT SUPPORT" appears and
track skips.
"CANNOT PLAY" flashes and/
or connected device cannot be
detected.
"READING" keeps flashing.
The iPod/iPhone does not turn on
or does not work.
If you still have troubles, reset the unit. ( 3)
12
EN_KD-X210[E_EU]1.indd 12
EN_KD-X210[E_EU]1.indd 12
All manuals and user guides at all-guides.com
Remedy
• Adjust the volume to the optimum level.
• Check the cords and connections.
Check to be sure the terminals of the speaker wires are
insulated properly, then reset the unit. If this does not solve
the problem, consult your nearest service center.
Check the [SRC SELECT] setting. ( 4)
• Connect the antenna firmly.
• Pull the antenna out all the way.
This unit can only display uppercase letters, numbers, and
a limited number of symbols. The unit can also display
uppercase Cyrillic letters. ( 11)
The playback order is determined by the file name (USB).
This depends on the recording process earlier.
Check whether the track is a playable format. ( 11)
• Check whether the connected device is compatible with this
unit and ensure the files are in supported formats. ( 11)
• Reattach the device.
• Do not use too many hierarchical levels and folders.
• Reattach the USB device.
• Check the connection between this unit and iPod/iPhone.
• Detach and reset the iPod/iPhone using hard reset.
Data Size:
B6L (182 mm x 128 mm)
Book Size:
B6L (182 mm x 128 mm)
10/23/2013 4:19:39 PM
10/23/2013 4:19:39 PM
Publicité
