GE 21028 Mode D'emploi page 19

3. Press CID/VOL (
4. Press MUTE/PROG button and ROOM MONITOR EXTENSION? shows
in the display.
5. Press the handset number of the handset being monitored.
6. If handset 1 is the room monitoring initiator, the following displays will
be shown.
ROOM MONITOR
HANDSET 2
Calling handset 1
NOTE: If handsets have been named, then the name will be displayed on LCD
instead of handset numbers.
NOTE: During the room monitoring, it will emit a beep tone if there are
incoming calls. You may press TALK/END/CALLBACK button to answer the
call and quit the room monitor mode.
NOTE: Press the *EXIT button on the handset to exit the room monitor.
NOTE: After you initiate the room monitor, you can switch to use handset
speakerphone to do the room monitoring by pressing the SPK button on the
initiater handset.
H S
ANDSET ETUP
You may program the following items:
Language, Handset Name, Ringer Tone, Ringer Volume, VIP Melody, Key
Tone ON/OFF, Message Alert, Ring Select, Security Code, Area Code,
Registration, De-Registration and Default Setting.
During programming, you may press the *EXIT button at any time to exit
the menu and go to the sub-menu and keep the previous setting.
All manuals and user guides at all-guides.com
or ) button to scroll to ROOM MONITOR.
ROOM MONITOR
EXTENSION ?
ROOM MONITOR
HANDSET 1
Called handset 2
19