Hama MiMo 300 Express Mode D'emploi page 17

You can now store four codes in the lower section of the window. The selected code is always used.
64 bit or 128 bit encryption is supported. 128 bit encryption is more secure. First select whether you
want to use Hexadecimal (allows characters from 0-9 and a-f to be used) or ASCII (you can use any
characters). The setting and the selection of either 64 or 128 bit encryption determines the length of the
code to be entered.
WEP 64 bit ASCII requires 5 characters
WEP 64 bit hexadecimal requires 10 characters
WEP 128 bit ASCII requires 13 characters
WEP 128 bit hexadecimal requires 26 characters
Examples: 64 bit hexadecimal (10 characters) = 231074a6ef
64 bit ASCII (5 characters) = j31n.
128 bit hexadecimal (26 characters) = 231074a6b9773ce43f91a5bef3
128 bit ASCII (13 characters) = urlaub2006.+0
8.2.2.2 WPA encryption
Wi-Fi Protected Access (WPA) is an encryption method for WLAN. WPA contains the WEP architecture,
but offers additional protection via dynamic codes, which are based on the Temporal Key Integrity Protocol
(TKIP), and also offers pre-shared keys (PSK) or extensible authentication protocol (EAP) for user authentica-
tion. However, a radius server is required for this.
WPA offers two types of authentication, either pre-shared key or authentication via special authentication
protocols, which are generally variations of EAP (Extensible Authentication Protocol). An authentication
server (RADIUS server) is used for the latter authentication method, which is rarely used for private
applications. Your administrator can give you the information you require to confi gure this authentication
method.
The pre-shared key method is more common and offers a high degree of security.
To use WPA encryption, select WPA-PSK under
Authentication type and TKIP or AES under Encryption.
Now enter the code used in the WPA preshared key fi eld.
The code entered must be absolutely identical with that used in the network. It must be min. 8 and max. 63
random characters for ASCII. Letters, numbers and special characters can be used. 64 characters are re-
quired for HEX, whereby only characters from 0-9 and a-f can be used. If you do not have this code, it can be
found in your router/access point or you can ask the person responsible for these devices.
Save the settings and click OK.
16
All manuals and user guides at all-guides.com
9. Support and contact information
If products are defective:
Please contact your dealer or Hama Product Consulting if you have any product claims.
Internet / World Wide Web:
Product support, new drivers or product information can be found at www.hama.de
Support Hotline – Hama Product Consulting:
Tel. +49 (0) 9091 / 502-115
Fax +49 (0) 9091 / 502-272
E-mail: produktberatung@hama.de
Note:
This product may only be used in Germany, Austria, Switzerland, France, England, Belgium, Spain, Holland,
Denmark, Hungary, Poland, Sweden, Luxemburg, Ireland, Greece, the Czech Republic, Slovakia and Finland.
See www.hama.de for the declaration of conformity with R&TTE Directive 99/5/EC.
17