10.3 Cleaning of the toe kick cover, filter
and condenser.
It is recommended to perform the following cleaning
steps very 12 months. If enabled, a visual message
on the display will serve as a reminder.
It is possible to disable the warning signal and see
the time left before the next cleaning has to be done.
Behind the frontal toe kick cover there is the
condenser.
To clean it use a vacuum cleaner with a soft brush
attachment at maximum power, sweeping it along
the vent slits. In case of a significant dust build up,
the toe kick cover can be removed to allow a more
accurate cleaning of the filter.
On the maintenance settings,
installation of the unit and after it has been turned
on, you can reset the condenser cleaning warning.
In the case the warning sign is enabled,
there will be a warning every 12 months,
alerting that it is time to clean the condenser.
After cleaning it, touch the reset icon in order
to reactivate the warning signal in 12 months.
If
you
do
not
want
alert for the condenser, touch the Off icon.
MAINTENANCE
SERVICE
after the
INFORMATION
the
cleaning
signal
Lower condenser.
For cleaning the condenser follow the instruc-
tions:
>
Remove the removable grille under the door.
>
Clean it thoroughly from any dust build up as
shown in the picture, taking care not to damage it.
The edges of the condenser are sharp,
therefore use adequate protection for
hands and arms when cleaning the
condenser.
EN
33