Fulgor Milano F7IFC30O1 Mode D'emploi page 14

4. BASIC OPERATION OF THE APPLIANCE
EN
4.1 Turning the appliance on and off
First time starting the unit
Touch the button
following launch screens:
...
INITIAL TEST
3) The display shows the main screen with
the temperature measured from inside the
compartments. Automatically the unit starts to
cool down until reaching the set temperatures.
18
-
°C
When the appliance is first switched on it is
recommended to wait at least 12 hours without
opening the doors and before placing any food
Serigra a VETRO USER 599 LCD2.8
inside the unit. During such period deactivate any
error message by pressing the Alarm button.
Shutdown.
1) touch the icon
Testo e gra ca
14
. The display shows the
1) Logo.
FUNCTIONS
2) Initial test
(lasts 3 minutes).
SETTINGS
FUNCTIONS
4) Home screen.
- Freezer
SETTINGS
compartment
+0°F (-18°C)
00
Funzioni
+ °C
00
+ °C
Impostazioni
00
- °C
off for 3 seconds.
ARE YOU SURE YOU WANT TO
POWER OFF THIS UNIT?
YES NO
ARE YOU SURE?
YES NO
When the fridge is off there are no indicators
that the fridge is plugged to a socket.
Switching off for longer periods
During long absence periods it is recommended
to switch off the freezer and disconnecting the
electrical plug or the breaker controlling the socket.
Completely empty the freezer, clean and dry it
and leave the doors and drawers partially open
to prevent unpleasant odors.
During the first startup, it will not be possi-
ble to use the Menu to modify the factory set-
tings until the preset temperature has been
reached.
Colore AAAA
colore C71
Each time the appliance is switched on it goes
through a self-diagnosis procedure lasting
three minutes before completely starting up.
2) Touch YES to
confirm.
3) Confirm
shutdown again
touching YES.