Starway Enzo Manuel De L'utilisateur page 49

Reset Motors
ALL : Reset of all motors
Pan&Tilt : Reset of Pan and Tilt motors
Head : Zoom reset
Test.Channel
Sub-menu allowing you to test all Enzo parameters such as:
Pan, Pan Fine, Tilt, Tilt Fine, Strobe, Dimmer, Dim Fine, Zoom, Focus, Gobo1, Gobo2, Animation wheel, Framing Blades...
Panel.Ctrl.
Submenu allowing manual control of all Enzo parameters such as:
Pan, Pan Fine, Tilt, Tilt Fine, Strobe, Dimmer, Dim Fine, Zoom, Focus, Gobo1, Gobo2, Animation wheel, Framing Blades...
Calibrate :
Sub-menu allowing to recalibrate the motors and the LEDs
To access this menu you must enter the PIN code to unlock this function.
Pin Code: "050"
This gives you access to the following parameters:
Pan, Pan Fine, Tilt, Tilt Fine, Strobe, Dimmer, Dim Fine, Zoom, Focus, Gobo1, Gobo2, Animation wheel, Framing Blades...
INFORMATION
Time.Info
CurrentTime: Display of the usage time (in hours) since the last power on
TotalTime: Display of the usage time (in hours) since the first power-up.
LastTime: Display of the usage time (in hours) since the last reset.
Time PIN: To access the reset of usage times you must enter a PIN code:
050 to reset the "Last Time"
ClearLast: ON / OFF to reset
Temp.Info
- Temperature display
xxx F or C - Temperature display
Fan Speed
- Fan speed display
Base Fan : xxx RPM
Fan 1: xxx RPM
Fan 2: xxx RPM
Fan 3: xxx RPM
Fan 4: xxx RPM
Gobo Fan : xxx RPM
Head Fan : xxx RPM
Error.Info
- Display of the last 10 error messages.
Model.Info
- Display of model name : Enzo
Software.V
- Display of the version of the various processors
1U01 - Vx.x.x
2U01 - Vx.x.x
3U01 - Vx.x.x
4U01 - Vx.x.x
5U01 - Vx.x.x
6U01 - Vx.x.x
7U01 - Vx.x.x
8U01 - Vx.x.x
9U01 - Vx.x.x
Page 49