AmazonBasics B074KGMWRQ Mode D'emploi page 9

1. Place the safe in the desired location and locate the mounting hole with cap covered in the
bottom of the safe.
2. Remove the cap, then use a pencil to mark the mounting hole in the floor.
3. Move the safe away, then use a 12 mm bit to drill mounting hole that are 2 in. (50 mm) deep.
4. Put the expansion bolt (included) into the mounting hole, then turn the clamping screw
counterclockwise to separate.
5. Align the safe over the hole, then secure the safe with the clamping screw and replace the cap.
4KGMWRQ, B074KDHMKJ, B074KHWNJZ-AmazonBasics-Fire proof safe-IM-V07 (EU).indb 9
All manuals and user guides at all-guides.com
9
11/1/17 12:38 P