AmazonBasics B074KGMWRQ Mode D'emploi page 7

Opening Safe For The First Time
• After installing the battery, to open an electronic lock the first time, press the following numbers/
symbols on the electronic keypad in this order: 1 - 5 - 9 - #. These numbers are preset.
• NOTE: You should change the entry code as soon as possible after opening the safe to insure
proper security.
• After you have entered the factory code, you will need to turn the handle clockwise to open the
door. You will have 5 seconds to turn the handle before the locking mechanism is reactivated.
Setting Your Own Code
• To enter your own security code you will need to follow the steps listed below:
1. After opening the electronic safe (with the preset factory code of 1, 5, 9, #) locate the small
2. Press the red button and then release it. You will hear two beeps. The yellow light on the
• With the door open and the yellow light on, enter your own personal security code, which can
be 3 - 8 digits long, and confirm your new code by pressing the " * " symbol on the electronic
touch pad. Before you close the door, try the new security code to make sure the lock releases
the handle so you can turn it and retract the live action bolts.
• DO NOT SHUT THE DOOR UNTIL YOU HAVE CONFIRMED THAT YOUR NEW SECURITY
CODE HAS BEEN ENTERED CORRECTLY.
• If the code fails, go through steps 1 and 2 again. If you write down your combination, you
must keep this information in a secure place, away from children, not inside the safe. Then you
should close and lock the safe.
• When you open the safe in the future enter the security code you have set followed by the "#"
symbol.
• If the incorrect security code is entered 3 times, you will have an automatic lockout for 20
seconds before you can try your code again.
• If the incorrect security code is entered 3 additional times, there will be a 5-minute lockout
before the code can be tried again.
4KGMWRQ, B074KDHMKJ, B074KHWNJZ-AmazonBasics-Fire proof safe-IM-V07 (EU).indb 7
All manuals and user guides at all-guides.com
red button on the inside of the door near the hinge.
faceplate will be activated and will stay on for a period of time that should allow you to
enter your code. You can only enter your code while the yellow light is on.
7
11/1/17 12:38 P