Makita BML802 Manuel D'instructions page 3

ENGLISH (Original instructions)
1. Battery cartridge
2. Red indicator
SPECIFICATIONS
Model
LED
Standard battery cartridge
Voltage
Operating time
Dimensions (with battery)
Net weight (with battery)
• Due to our continuing program of research and development, the specifications herein are subject to change without
notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
Symbols
................ Read instruction manual.
................. Indoor use only
................. Only for EU countries
Do not dispose of electric equipment or
battery pack together with household
waste material!
In observance of European Directive
2002/96/EC on waste electric and
electronic equipment, 2006/66/EC on
batteries and accumulators and waste
batteries and accumulators and their
implementation in accordance with
national laws, electric equipment and
battery pack that have reached the end
of their life must be collected separately
and returned to an environmentally
compatible recycling facility.
IMPORTANT SAFETY
INSTRUCTIONS
WARNING:
When using electric tools, basic safety precautions should
always be followed to reduce the risk of fire, electric
shock, and personal injury, including the following:
READ ALL INSTRUCTIONS.
1. Before using battery cartridge, read all instructions
and cautionary markings on (1) battery charger, (2)
battery, and (3) product using battery.
2. Recharge only with the charger specified by the
manufacturer. A charger that is suitable for one type of
Explanation of general view
3. Button
4. Switch
BL1415
14.4 V
Approx. 4 hours
L 256 mm
W 79 mm
H 99 mm
0.65 kg
5.
6.
BML802
3.2 W x 1 pc
BL1430
Approx. 9 hours Approx. 6 hours
272 mm
79 mm
99 mm
0.84 kg
battery pack may create a risk of fire when used with
another battery pack.
3. Use a power source with the voltage specified on the
nameplate of the charger.
4. Do not attempt to use a step-up transformer, an
engine generator or DC power receptacle.
5. After charging or before attempting any maintenance
or cleaning, unplug the charger from the power
source.
6. This battery holder part is not waterproof. Do not use it
in damp or wet locations. Do not expose it to rain or
snow. Do not wash it in water.
7. Do not touch the inside of the flashlight head with
tweezers, metal tools, etc.
8. Under abusive conditions, liquid may be ejected from
the battery, avoid contact. If contact accidentally
occurs, flush with water. If liquid contacts eyes,
additionally seek medical help. Liquid ejected from the
battery may cause irritation or burns.
9. Do not short the battery cartridge:
(1) Do not touch the terminals with any conductive
material.
(2) Avoid storing battery cartridge in a container with
other metal objects such as nails, coins, etc.
(3) Do not expose battery cartridge to water or rain.
A battery short can cause a large current flow,
overheating, possible burns and even a breakdown.
10. If electrolyte gets into your eyes, rinse them out with
clear water and seek medical attention right away. It
may result in loss of your eyesight.
11. Be careful not to drop or strike battery.
12. Do not incinerate the battery cartridge even if it is
severely damaged or is completely worn out. The
battery cartridge can explode in a fire.
CAUTION:
1. When the tool is not in use, always switch off and
remove the battery cartridge from the tool.
Strap hook
Ring
BL1815 BL1830
18 V
Approx. 13 hours
256 mm 272 mm
79 mm 79 mm
116 mm 116 mm
0.71 kg 0.93 kg
3