Publicité
Les langues disponibles
Les langues disponibles
English
In the next screen you are asked: 'When do you want your
backups to start'
8. Choose the Start time .
If you chose the Once a week backup option, choose the
Day also.
9. Click the Next button.
The Backup Strategy window will appear.
This window reminds you to make sure that the drive you plan
to backup to (your Maxtor OneTouch drive) is connected to
4
your system and ready.
You are given the option of doing your first backup immediately.
It's good idea to do this to test your script and make sure that it
works.
Make sure Start the first backup now is checked at the
bottom of the window.
10. Click Finish .
Retrospect will scan your system and start the backup process.
After it finishes scanning, a window will appear asking you to:
'Select a disk to add as storage . .'
11. Select your Maxtor OneTouch drive and click Proceed.
The Add New Member window will appear, reminding you of
the drive you have chosen to backup your system to.
54
12. Click OK.
The EasyScript Backup window will open and Retrospect will
start copying files to your OneTouch drive.
Normal backup may take a long time the first time. Each
time after that, it will take less time. This is because
Retrospect compares the files in your actual system to
the backup version and only copies new files or files that
have been modified since the last backup. For more
information on backup strategies, see the Retrospect
online help system, by clicking question mark icon in the
Retrospect application.
When the backup finishes, you should see the message:
'Execution completed successfully.'
If your system backup was successful, you can exit
Retrospect.
13. Under the File menu, choose Exit.
When you exit Retrospect, a window may appear telling you
script is'next for automatic execution.'
Make sure that the drive you plan to use for the next backup
(your OneTouch drive) is connected to your computer and
ready. If you are not sure, you can click the Check Media
button to have Retrospect check for you.
Note: If you get the message that 'the configuration isn't
ready,' click Don't Quit, make sure that your OneTouch drive
is connected and turned on and quit Retrospect again.
Congratulations. You've created an automated backup script and
have done your first system backup.
Publicité
