IMPORTANT INSTRUCTIONS
18. Do not plug into or unplug the product from the electrical outlet with a wet hand.
19. Do not operate this product if it has a damaged power cord or plug, if it malfunctions,
or if it has been dropped or damaged. This product has no user-serviceable parts. Do
not attempt to examine or repair this product yourself. Only qualified service
personnel should perform any servicing; take the product to an appliance repair shop
of your choice for inspection and repair.
20. This appliance is not intended for use by persons (included children) with reduced
physical, sensory or mental capability, or lack of experience and knowledge, unless
they have been given supervision or instruction concerning use of the appliance by a
person responsible for their safety.
21. Children should be supervised to ensure that they do not play with the appliance.
22. This product is intended solely for indoor, non-commercial, non-industrial use in
temporarily heating rooms. Do not use this product outdoors.
23. Do not operate the product continuously. Portable electric heaters are designed for
finite space heating or as a supplementary heat source. They are not intended to be
main sources of heat during the normal heating season.
24. Do not hang or wall-mount the product.
25. Place the product upright on a flat, level, stable, heat-resistant surface. This heater is
for use on 120 volts. The cord has a plug as shown in figure A. See Figure 1 for
grounding instruction. An adapter as shown at C is available for connecting
three-blade grounding type plugs to two-slot receptacles. The green grounding plug
extending from the adapter must be connected to a permanent ground such as a
properly grounded outlet box. The adaptor should not be used if a three-slot
grounded receptacle is available.
26. Always plug heaters directly into a wall outlet/ receptacle. Never use with an
extension cord or relocatable power tap (outlet/ power strip).
27.Do not attempt to disassemble heater for service or cleaning.Damage to the heater
could occur and improper re-assembly could cause risk of fire or electric shock.
GROUNDING PIN
ADAPTER
GROUNDING
MEANS
SAVE THESE INSTRUCTIONS
COVER OF GROUNDED
OUTLET BOX
METAL SCREW
A
B
C D
GROUNDING
PIN
4
Fig.1