Télécharger Imprimer la page

Costway FP10362US Mode D'emploi page 6

Publicité

Les langues disponibles

Les langues disponibles

Never use with an extension cord or relocatable
power tap (outlet / power strip).
OPERATING INSTRUCTION
On the top-right of the fireplace is the touchscreen control panel. This panel
contains the buttons to properly operate the electric fireplace. the buttons on
the remote control function in the same way. The remote control has an
effective range of up to 6 m/20 ft.
Digital Display
10
NOTE: The remote control is intended only for the functional operation of the
product, it can not lock/unlock the heating function!
POWER
The power button turns the fireplace on & off. When the fireplace is
off pressing the power button once will switch on the fireplace. Once on, if the
fireplace display is not illuminated pressing the power button will light up the
display. If the power button is pressed again within 10 seconds it will turn off
the fireplace. If the display is already illuminated then only one press of the
×
power button is needed to turn off the fireplace.
The power button has a built in memory function that will retain the status of
the fireplace when turned off. With the exception of the timer, the fireplace
will restart in its previous status. If the fireplace is disconnected from the
main power source it will lose the memory and restart at the default settings.
FLAME
Each time the Flame Button is pressed, the intensity of the flame decrease.
There are 3 brightness levels(L4-L2), flame off and the ember bed brightest
(L1), and an OFF position you can cycle through. When the flame is in OFF
position, turn on the heat at this time, the ember bed will be slightly bright to
indicate that the heat has been turned on.
HEATER
The heat button is used to turn the heat on&off. Pressing the Heat Button
once turns the Heat on. Pressing the Heat Button a second time within 10
seconds will turn the heat off. When turn off the heat, the quartz tubes will
stop working first, then the blower after 60 seconds.
When the heat is on, pressing the Heat Button 5 seconds will adjust the
temperature value.
There are 11 temperature settings : 82
68
F-70
F-72
o
o
F-ON - 64
o
F-74
F-76
F-78
F-80
F (27
C-ON - 18
o
o
o
o
o
o
F- 66
F -
o
o
C-19
C-
o
o
11

Publicité

loading