Urmet 1051/122 Manuel D'installation page 8

Installation
Mounting the Smoke Detector
Step 1. Place the Smoke Detector at desired mounting location and use the Range Test function to make sure the Smoke
Detector can be received by the Control Panel at mounting location.
Step 2. Take out the mounting sheet included in the package. The picture's size equals the Smoke Detector's actual size and
the perforated design allows for easy tear-off after installation.
Step 3. Position the sheet tight against the ceiling and use the four holes as template to drill holes and insert wall plugs if
required. Ensure the wall plugs are flush with the mounting surface.
Step 4. Place the mounting bracket on top of the mounting sheet and screw it onto the wall. The bracket provides bidirectional
flexibility. Users can either rotate the bracket clockwise or counterclockwise to lock the hook.
Step 5. The Smoke Detector has three notches on its back cover for easy identification.
Step 6. Hold the Smoke Detector with extra care and align the three notches with the hooks on the mounting bracket.
Step 7. Rotate clockwise to lock the hook.
Step 8. Installation is now complete. You can now tear off the mounting sheet.
Technical specifications
Smoke detection: in photoelectric chamber

Sensor of temperature

Power supply: 3 batteries CR123A 3V

Battery life: 10 years

Two-way radio frequency: 868 MHz

Maximum radio power transmitted: 14dBm

Sound level of the internal siren: 85dB/3m

Working temperature range -10°C – +45°C

Dimensions: 105 mm X 105 mm X 41 mm

Weight: 100g

EN14604 certified

Hereby, URMET S.p.A. declares that the radio equipment type: SMOKE DETECTOR 1051/122 is in compliance with Directive
2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: www.urmet.com.
DIRECTIVE 2012/19/EU OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 4 July 2012 on waste electrical and
electronic equipment (WEEE).
The symbol of the crossed-out wheeled bin on the product or on its packaging indicates that this product must not be
disposed of with your other household waste.
Instead, it is your responsibility to dispose of your waste equipment by handing it over to a designated collection point for the
recycling of waste electrical and electronic equipment. The separate collection and recycling of your waste equipment at the
time of disposal will help to conserve natural resources and ensure that it is recycled in a manner that protects human health
and the environment.
For more information about where you can drop off your waste equipment for recycling, please contact your local city office, your
household waste disposal service or the shop where you purchased the product.
8
SIMPLIFIED EU DECLARATION OF CONFORMITY
DS1051-312