Qcells Q.HOME CORE H4 Guide Rapide D'installation page 20

10 Connecting the Cables
■
CAUTION
■
■
■
■
20
Before connecting electrical cables, make sure the AC circuit breaker, PV switch, and DC
switch are OFF.
AC Circuit Breaker: OFF
(in the junction box)
Batteries can be replaced only by qualified personnel. If the battery needs to be
replaced, you must use a battery that meets the manufacturer's specifications.
Make sure to match the polarity of the cables properly when installing. Otherwise, it may
cause electric shock or the product may permanently be damaged. The damage from
this is not covered by the warranty.
Before batteries are connected, all other connections should be done and the battery
interrupter must be off.
Q.HOME CORE H4 is currently not available for multi-inverter configurations installed per
site. That includes but not limited to Qcells products and other manufacturer's products.
This may change in the future. Please seek your local Qcells region office for further
details.
DC Switch: OFF
(in the battery pack)
PV Switch: OFF
(in the inverter)