Qcells Q.HOME CORE H4 Guide Rapide D'installation page 17

9.2 Wall Mount
Check the location of a hole of the bracket and drill a hole on the wall.
1
Mounting hole: Ø9
■
Insert an anchor into the hole and fix the bracket with a bolt.
2
Use the wall mount bolts included in the Q.VOLT package.
■
At least 4 bolts are required to secure the bracket.
■
Place the product on the bracket.
3
Secure the bottom of the product to the bracket using the M6 bolts.
4
Perforation hole Ø10
Anchor Ø10
Wall mount
bracket hole Ø9
Washer ring
Wall mount bolt Ø8
17