Publicité
Les langues disponibles
Les langues disponibles
8622979
CLEANING
Never use a pressure washer to clean the power wheelbarrow. Water can
penetrate tight areas of the machine or its transmission case and cause damage
to spindles, gears, bearings or the engine. This can shorten the equipment's
operational life and reduce serviceability.
Do not use strong detergents or petroleum based cleaners when cleaning
plastic parts. Chemicals can damage plastics.
LUBRICATION
Inspect and lubricate the tool when required. Only use a premium quality
lightweight machine oil to lubricate the tool. Other lubricants may not be
suitable and could damage the tool or cause a malfunction during use.
NOTICE! NEVER use a penetrating oil to lubricate the tool. Penetrating oil may
act as a solvent that can break down the grease and cause the tool to seize up.
STORAGE
If the power wheelbarrow will not be used for a period be used for a period
longer than 30 days, follow the steps below to prepare your unit for storage.
Consult the engine manual for storage steps involving the engine.
1.
Use clean cloths to clean off the outside of the machine and to keep the air
vents free of obstructions.
2.
Inspect for any loose or damaged parts. Repair or replace damaged parts
and tighten loose screws, nuts or bolts.
3.
Store your unit on flat ground in a clean, dry building that has good
ventilation.
DISPOSAL
Recycle a tool damaged beyond repair at the appropriate facility.
Contact your local municipality for a list of disposal facilities or by-laws for
electronic devices, batteries, oil or other toxic liquids.
IMPORTANT! DO NOT pollute the environment by allowing uncontrolled
discharge of waste oil.
12
All manuals and user guides at all-guides.com
660 lb Power Wheelbarrow
For technical questions call 1-800-665-8685
V 4.0
Publicité
