Klarstein 10030038 Mode D'emploi page 16

All manuals and user guides at all-guides.com
"PROG"process(The longest setting time is 5mins):
Press the PROG key then enter into the PROG program,the "Speed"will be flashed. Pressing the / key
for regulating the speed and press the PROG key then enter into regulating "Time",the last two digitals of the
00:00 will be flashed. Then press the / key, to regulate the seconds,and press the PROG key again,
the last front digitals of the 00:00 will be flashed,then press the / key for regulating the minutes,press
the on/stop key to work
1. Cut the ingredients into 2 cm block size (Trim and cut Meat into strips). As shown in figure 1.
2. Use measuring cup to take right amount of ingredients according to recipe and Personal taste. As shown
in figure 2.
3. Put ingredients into jug. Please note that no foreign matter is in the jug. As shown in figure 3
4. Amount of water . You can adjust it according to the recipe. As shown in figure 4.
5. Put the lid on the jug and the little round cup on the lid. There is micro-switch in the jug. If the lid is not
put in the right position, this device won't work. As shown in figure 5.
6. Put the jug on the right position of main body. As shown in figure 6.
7. Plug in the power cord.
8. When turning on the power supply, the device will send alarm, then the screen lights up. Chose button
to start device first. Then press menu to choose the function, such as rice paste, As shown in figure 8.
9. Press ON/OFF button to start to work. The voice of the fast and slow, belongs to the normal phenom-
enon. As shown in figure 9.
10. After completion of work, function words flashing. Then an alarm sounds. After the alarm was lifted,
device will go back to standby mode. As shown in figure 10.
11. Unplug the power cord. Remove the jug and open the lid. Note of steam when open the lid to prevent
burns. As shown in figure 11.
12. Pour out food and season food according to personal taste. When pouring out food do not be too urgent
to prevent the liquid overflow as shown in figure 12.
13. Clean the inside of the jug in time. Clean the outer surface of the soup maker with a soft, damp cloth as
shown in figure 13.
14. Wipe water spots on the surface of device. Separate main body and jug and put them in a cool, ventilated
place to dry them and prevent the odour.
Use
MAX
WATER
MIN
16