Gateway GM5407H Guide page 60

All manuals and user guides at all-guides.com
4
If you are replacing an expansion card, remove the old
card. You can slightly seesaw the card end-to-end to
loosen the card, but do not bend the card sideways.
card. Touching the contacts can cause electrostatic damage to the card.
5
Install the new card into the expansion slot. You can
slightly seesaw the card end-to-end to help insert the
card, but do not bend the card sideways.
6
If you have just replaced an expansion card, reconnect
the expansion card cables (if any) using your notes from
Step
connect its cables according to its user guide.
7
Press the card retention lever back into place.
8
Replace the side panel by following the instructions in
"Replacing the side panel" on page
54
CHAPTER 4: Upgrading Your Computer
Caution
Do not touch the contacts on the bottom part of the expansion
2. If you have added a new expansion card,
40.